Try out Nethserver 7 beta1

IPS report should be under Report, which should be the word “Reports”

4 Likes

Not sure where to go from here. The /var/log/squidGuard is full of blocked urls and I tried changing the /etc/e-smith/templates/etc/lightsquid/lightsquid.cfg to
#path to access.log
$logpath ="/var/log/squidGuard";
and
$logpath ="/var/log/squidGuard/urlfilter.log";

for giggles but no dice.

Edit;
I shutdown the vm last night and restarted it this morning, received the same error, but I left it running and checked a few hours later and it was reporting without error as in the screenshots by @GG_jr a couple of posts after mine.

I will say, I believe the report to be… to put it mildly, utterly useless. Now I use other gateway distros, paid and free, with robust, comprehensive reporting so I expect a lot, but this is… not very useful, I can’t even tell what’s blocked so I’m not sure of the point of this in the gui.
Is there something I’m missing, is there cli configuration that can be done to at least break out what was blocked, or break out categories, something that shows what squid is doing other than a basic list of web sites?

2 Likes

I can confirm that!

1 Like

The lightsquid parser is set to run daily. Maybe we have to wait until the cron job runs.
To force it we can run:

/usr/sbin/lightparser.pl

or what the cron job has:

/usr/sbin/lightparser.pl -y /var/log/squid/access.log
4 Likes

Hi @dnutan ,

Thank you!

I have installed the Web proxy module on Aug 05 at 00:40, so, after 24 hours, Web proxy stats, should have been seen.

Aug 05 00:40:04 Updated: kernel-tools-libs-3.10.0-327.28.2.el7.x86_64
Aug 05 00:40:05 Updated: kernel-tools-3.10.0-327.28.2.el7.x86_64
Aug 05 00:40:06 Updated: python-perf-3.10.0-327.28.2.el7.x86_64
Aug 05 00:40:19 Installed: kernel-3.10.0-327.28.2.el7.x86_64
Aug 05 00:42:13 Installed: perl-GD-2.49-3.el7.x86_64
Aug 05 00:42:13 Installed: clamav-data-empty-0.99.2-1.el7.noarch
Aug 05 00:42:14 Installed: clamav-lib-0.99.2-1.el7.x86_64
Aug 05 00:42:16 Installed: clamav-filesystem-0.99.2-1.el7.noarch
Aug 05 00:42:16 Installed: clamav-server-0.99.2-1.el7.x86_64
Aug 05 00:42:17 Installed: clamav-server-systemd-0.99.2-1.el7.noarch
Aug 05 00:42:17 Installed: clamav-update-0.99.2-1.el7.x86_64
Aug 05 00:42:18 Installed: clamav-0.99.2-1.el7.x86_64
Aug 05 00:42:18 Installed: clamav-unofficial-sigs-3.7.2-1.el7.noarch
Aug 05 00:42:18 Installed: nethserver-antivirus-1.2.0-1.ns7.noarch
Aug 05 00:42:19 Installed: perl-GDTextUtil-0.86-23.el7.noarch
Aug 05 00:42:19 Installed: 1:perl-GDGraph-1.44-15.el7.noarch
Aug 05 00:42:19 Installed: perl-GDGraph3d-0.63-23.el7.noarch
Aug 05 00:42:20 Installed: lightsquid-1.8-18.el7.lux.noarch
Aug 05 00:42:20 Installed: c-icap-libs-0.4.2-1.ns7.x86_64
Aug 05 00:42:21 Installed: c-icap-0.4.2-1.ns7.x86_64
Aug 05 00:42:21 Installed: nethserver-c-icap-1.1.0-1.ns7.noarch
Aug 05 00:42:22 Installed: libecap-0.2.0-9.el7.x86_64
Aug 05 00:42:22 Installed: perl-DB_File-1.830-6.el7.x86_64
Aug 05 00:42:22 Installed: 1:perl-FCGI-0.74-8.el7.x86_64
Aug 05 00:42:23 Installed: perl-CGI-3.63-4.el7.noarch
Aug 05 00:42:23 Installed: lightsquid-apache-1.8-18.el7.lux.noarch
Aug 05 00:42:23 Installed: samba-winbind-modules-4.2.10-7.el7_2.x86_64
Aug 05 00:42:24 Installed: samba-winbind-4.2.10-7.el7_2.x86_64
Aug 05 00:42:25 Installed: samba-winbind-clients-4.2.10-7.el7_2.x86_64
Aug 05 00:42:25 Installed: libtool-ltdl-2.4.2-21.el7_2.x86_64
Aug 05 00:42:27 Installed: 7:squid-3.3.8-26.el7_2.4.x86_64
Aug 05 00:42:28 Installed: nethserver-squid-1.4.0-1.ns7.noarch
Aug 05 00:42:28 Installed: squidclamav-6.15-1.ns7.x86_64
Aug 05 00:42:32 Installed: squidGuard-1.4-26.el7.x86_64
Aug 05 00:42:32 Installed: nethserver-squidguard-1.5.0-1.ns7.noarch
Aug 05 00:42:33 Installed: nethserver-squidclamav-1.3.0-1.ns7.noarch
Aug 05 00:42:33 Installed: nethserver-lightsquid-1.1.0-1.ns7.noarch

I have run “/usr/sbin/lightparser.pl”, unfortunately before opened NS GUI, so, I don’t know if the the Web proxy stats showed or no, the records.

Anyway, now it works.

I will check in the next days to see if everything it’s ok.

BR,
Gabriel

1 Like

POP3 Proxy issues

POP3 proxy: enabled
- Antivirus: enabled
- Antispam: enabled

I cannot receive emails (Mozilla Thunderbird, POP3, port 110):

Aug  6 19:40:07 dc-ad p3scan[16123]: POP3 Connection from 192.168.1.11:62675
Aug  6 19:40:07 dc-ad p3scan[16123]: Real-server address is 91.195.62.2:110
Aug  6 19:40:07 dc-ad p3scan[16123]: Ignoring servers TOP capability...
Aug  6 19:40:07 dc-ad p3scan[16123]: Ignoring servers PIPELINING capability...
Aug  6 19:40:07 dc-ad p3scan[16123]: Session done (Clean Exit). Mails: 0 Bytes: 0
Aug  6 19:40:51 dc-ad p3scan[16180]: POP3 Connection from 
192.168.1.11:62678
Aug  6 19:40:51 dc-ad p3scan[16180]: Real-server address is 
91.195.62.2:110
Aug  6 19:40:51 dc-ad p3scan[16180]: Ignoring servers TOP capability...
Aug  6 19:40:51 dc-ad p3scan[16180]: Ignoring servers PIPELINING 
capability...
Aug  6 19:40:52 dc-ad p3scan[16180]: WARNING: Your scanner returned 
neither 0, a viruscode, nor a good viruscode, but 2
Aug  6 19:40:52 dc-ad p3scan[16180]: ERR: We can't say if it is a virus!
 So we have to give the client the mail! You should check your 
configuration/system
Aug  6 19:40:52 dc-ad p3scan[16180]: ERR: Scanner returned unexpected 
error code. You should check your configuration/system.
Aug  6 19:40:52 dc-ad p3scan[16180]: ERR: Exiting now...
Aug  6 19:40:52 dc-ad p3scan: ERR: Scanner returned unexpected error 
code. You should check your configuration/system.
Aug  6 19:40:52 dc-ad p3scan[15990]: ERR: Attention: child with pid 
16180 died with abnormal termsignal (11)! This is probably a bug. Please
 report to the author. numprocs is now 0
Aug  6 19:40:52 dc-ad kernel: p3scan[16180]: segfault at 241 ip 
00007f36d8582ab4 sp 00007ffe52b8c4c0 error 4 in 
libc-2.17.so[7f36d853a000+1b7000]


_**POP3 proxy**: enabled_
   _**- Antivirus**: disabled_
   _- **Antispam**: enabled or disabled_

_**I can receive emails (Mozilla Thunderbird, POP3, port 110):**_

Aug  6 19:47:14 dc-ad /sbin/e-smith/db[16688]: 
/var/lib/nethserver/db/configuration: OLD 
p3scan=service|SSLScan|enabled|SpamScan|enabled|TCPPort|8110|Template|/etc/p3scan/p3scan-en.mail|VirusScan|enabled|access||status|enabled
Aug
  6 19:47:14 dc-ad /sbin/e-smith/db[16688]: 
/var/lib/nethserver/db/configuration: NEW 
p3scan=service|SSLScan|enabled|SpamScan|enabled|TCPPort|8110|Template|/etc/p3scan/p3scan-en.mail|VirusScan|disabled|access||status|enabled
Aug
  6 19:47:14 dc-ad dbus-daemon: dbus[646]: [system] Activating via 
systemd: service name='org.freedesktop.timedate1' 
unit='dbus-org.freedesktop.timedate1.service'
Aug  6 19:47:14 dc-ad dbus[646]: [system] Activating via systemd: 
service name='org.freedesktop.timedate1' 
unit='dbus-org.freedesktop.timedate1.service'
Aug  6 19:47:14 dc-ad systemd: Starting Time & Date Service...
Aug  6 19:47:14 dc-ad dbus[646]: [system] Successfully activated service
 'org.freedesktop.timedate1'
Aug  6 19:47:14 dc-ad dbus-daemon: dbus[646]: [system] Successfully 
activated service 'org.freedesktop.timedate1'
Aug  6 19:47:14 dc-ad systemd: Started Time & Date Service.
Aug  6 19:47:14 dc-ad esmith::event[16692]: Event: 
nethserver-p3scan-update
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
configuration
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
certificates
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
networks
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
accounts
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
routes
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
hosts
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
proxypass
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
fwrules
Aug  6 19:47:14 dc-ad esmith::event[16692]: Migrating existing database 
fwservices
Aug  6 19:47:15 dc-ad esmith::event[16692]: Migrating existing database 
portforward
Aug  6 19:47:15 dc-ad esmith::event[16692]: Migrating existing database 
tc
Aug  6 19:47:15 dc-ad esmith::event[16692]: Migrating existing database 
dhcp
Aug  6 19:47:15 dc-ad esmith::event[16692]: Migrating existing database 
contentfilter
Aug  6 19:47:15 dc-ad esmith::event[16692]: Migrating existing database 
vhosts
Aug  6 19:47:15 dc-ad esmith::event[16692]: Migrating existing database 
domains
Aug  6 19:47:15 dc-ad esmith::event[16692]: Action: 
/etc/e-smith/events/nethserver-p3scan-update/S00initialize-default-databases
 SUCCESS [0.488224]
Aug  6 19:47:15 dc-ad esmith::event[16692]: expanding 
/etc/mail/spamassassin/bwlist.cf
Aug  6 19:47:15 dc-ad esmith::event[16692]: expanding 
/etc/mail/spamassassin/p3scan.cf
Aug  6 19:47:15 dc-ad esmith::event[16692]: expanding 
/etc/p3scan/p3scan.conf
Aug  6 19:47:15 dc-ad esmith::event[16692]: Action: 
/etc/e-smith/events/actions/generic_template_expand SUCCESS [0.282509]
Aug  6 19:47:15 dc-ad esmith::event[16695]: Event: 
nethserver-firewall-base-save nethserver-p3scan-update
Aug  6 19:47:15 dc-ad esmith::event[16695]: Action: 
/etc/e-smith/events/nethserver-firewall-base-save/S02providers-cleanup 
SUCCESS [0.206411]
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding /etc/collectd.conf
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding /etc/hosts
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding /etc/lsm/lsm.conf
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/actions
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/hosts
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/interfaces
Aug  6 19:47:15 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/maclist
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/mangle
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/masq
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding /etc/shorewall/nat
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/policy
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/providers
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/rtrules
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/rules
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/shorewall.conf
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/stoppedrules
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/tcinterfaces
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/tcpri
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/tunnels
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/shorewall/zones
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/etc/collectd.d/ping.conf
Aug  6 19:47:16 dc-ad esmith::event[16695]: expanding 
/var/www/html/wpad.dat
Aug  6 19:47:16 dc-ad esmith::event[16695]: Action: 
/etc/e-smith/events/actions/generic_template_expand SUCCESS [0.621858]
Aug  6 19:47:16 dc-ad systemd: Reloading.
Aug  6 19:47:16 dc-ad systemd: Configuration file 
/usr/lib/systemd/system/auditd.service is marked world-inaccessible. 
This has no effect as configuration data is accessible via APIs without 
restrictions. Proceeding anyway.
Aug  6 19:47:16 dc-ad kernel: ipt_ULOG: ULOG: fail to register logger.
Aug  6 19:47:17 dc-ad kernel: ipt_ULOG: ULOG: fail to register logger.
Aug  6 19:47:17 dc-ad kernel: ipt_ULOG: ULOG: fail to register logger.
Aug  6 19:47:17 dc-ad logger: Shorewall reloaded
Aug  6 19:47:17 dc-ad esmith::event[16695]: [NOTICE] Shorewall restart
Aug  6 19:47:17 dc-ad esmith::event[16695]: Action: 
/etc/e-smith/events/nethserver-firewall-base-save/S89nethserver-shorewall-restart
 SUCCESS [1.563803]
Aug  6 19:47:18 dc-ad systemd: Reloading.
Aug  6 19:47:18 dc-ad systemd: Configuration file 
/usr/lib/systemd/system/auditd.service is marked world-inaccessible. 
This has no effect as configuration data is accessible via APIs without 
restrictions. Proceeding anyway.
Aug  6 19:47:18 dc-ad esmith::event[16695]: [INFO] lsm is disabled: 
skipped
Aug  6 19:47:18 dc-ad esmith::event[16695]: [INFO]
Aug  6 19:47:18 dc-ad systemd: Reloading.
Aug  6 19:47:18 dc-ad systemd: Configuration file 
/usr/lib/systemd/system/auditd.service is marked world-inaccessible. 
This has no effect as configuration data is accessible via APIs without 
restrictions. Proceeding anyway.
Aug  6 19:47:18 dc-ad esmith::event[16695]: [INFO] service collectd 
restart
Aug  6 19:47:18 dc-ad collectd[15949]: Exiting normally.
Aug  6 19:47:18 dc-ad collectd[15949]: collectd: Stopping 5 read 
threads.
Aug  6 19:47:18 dc-ad collectd[15949]: rrdtool plugin: Shutting down the
 queue thread. This may take a while.
Aug  6 19:47:18 dc-ad systemd: Stopping Collectd statistics daemon...
Aug  6 19:47:18 dc-ad collectd[15949]: ping plugin: Shutting down 
thread.
Aug  6 19:47:18 dc-ad collectd[15949]: collectd: Stopping 5 write 
threads.
Aug  6 19:47:18 dc-ad systemd: Started Collectd statistics daemon.
Aug  6 19:47:18 dc-ad systemd: Starting Collectd statistics daemon...
Aug  6 19:47:18 dc-ad esmith::event[16695]: [INFO] collectd restart
Aug  6 19:47:18 dc-ad esmith::event[16695]: Action: 
/etc/e-smith/events/actions/adjust-services SUCCESS [0.384126]
Aug  6 19:47:18 dc-ad esmith::event[16695]: Event: 
nethserver-firewall-base-save SUCCESS
Aug  6 19:47:18 dc-ad esmith::event[16692]: Action: 
/etc/e-smith/events/nethserver-p3scan-update/S20firewall-adjust SUCCESS 
[2.879434]
Aug  6 19:47:18 dc-ad collectd[17182]: Initialization complete, entering
 read-loop.
Aug  6 19:47:18 dc-ad systemd: Reloading.
Aug  6 19:47:18 dc-ad systemd: Configuration file 
/usr/lib/systemd/system/auditd.service is marked world-inaccessible. 
This has no effect as configuration data is accessible via APIs without 
restrictions. Proceeding anyway.
Aug  6 19:47:18 dc-ad systemd: Starting p3scan proxy...
Aug  6 19:47:18 dc-ad p3scan[17220]: P3Scan Version 2.3.2
Aug  6 19:47:18 dc-ad p3scan[17220]: Selected scannertype: basic (Basic 
file invocation scanner)
Aug  6 19:47:18 dc-ad p3scan[17220]: Listen now on 0.0.0.0:8110
Aug  6 19:47:18 dc-ad p3scan[17221]: Changing uid (we are root)
Aug  6 19:47:18 dc-ad p3scan[17221]: Running as user: amavis
Aug  6 19:47:18 dc-ad systemd: Started p3scan proxy.
Aug  6 19:47:18 dc-ad esmith::event[16692]: [INFO] p3scan has been 
started
Aug  6 19:47:18 dc-ad esmith::event[16692]: 
Aug  6 19:47:18 dc-ad esmith::event[16692]: Action: 
/etc/e-smith/events/actions/adjust-services SUCCESS [0.367546]
Aug  6 19:47:18 dc-ad esmith::event[16692]: Event: 
nethserver-p3scan-update SUCCESS
 esmith::event[16692]: Event: nethserver-p3scan-update SUCCESS

Aug  6 19:55:51 dc-ad p3scan[17851]: POP3 Connection from 192.168.1.11:62802
Aug  6 19:55:51 dc-ad p3scan[17851]: Real-server address is 91.195.62.2:110
Aug  6 19:55:51 dc-ad p3scan[17851]: Ignoring servers TOP capability...
Aug  6 19:55:51 dc-ad p3scan[17851]: Ignoring servers PIPELINING capability...
Aug  6 19:56:03 dc-ad p3scan[17851]: Session done (Clean Exit). Mails: 1 Bytes: 8489
Aug  6 19:56:18 dc-ad clamd: SelfCheck: Database status OK.
Aug  6 19:56:18 dc-ad clamd[2199]: SelfCheck: Database status OK.
Aug  6 19:57:35 dc-ad p3scan[17986]: POP3 Connection from 192.168.1.11:62833
Aug  6 19:57:35 dc-ad p3scan[17986]: Real-server address is 91.195.62.2:110
Aug  6 19:57:35 dc-ad p3scan[17986]: Ignoring servers TOP capability...
Aug  6 19:57:35 dc-ad p3scan[17986]: Ignoring servers PIPELINING capability...
Aug  6 19:57:46 dc-ad p3scan[17986]: Session done (Clean Exit). Mails: 1 Bytes: 126525

Please advise me!

TIA,
Gabriel

EDIT - UPDATE:

Sometimes, when I switch “Antivirus” from “enabled” to “disabled” or, vice versa, the “p3scan” service goes to “Stopped”.

1 Like

Don’t know if it will fix the issue, but there is a p3scan package in testing repo:

yum --enablerepo=nethserver-testing install nethserver-p3scan

Could be the same from Software center?

How can I compare the two packages?

EDIT:

It’s an update. I will try.
Thank you!

It seems so, they were released on different dates and have different hash sums.

Doesn’t work!

Aug 6 21:31:08 dc-ad p3scan[25246]: POP3 Connection from
192.168.1.11:64142
Aug 6 21:31:08 dc-ad p3scan[25246]: Real-server address is
91.195.62.2:110
Aug 6 21:31:08 dc-ad p3scan[25246]: Ignoring servers TOP capability…
Aug 6 21:31:08 dc-ad p3scan[25246]: Ignoring servers PIPELINING
capability…
Aug 6 21:31:08 dc-ad p3scan[25246]: WARNING: Your scanner returned
neither 0, a viruscode, nor a good viruscode, but 2
Aug 6 21:31:08 dc-ad p3scan[25246]: ERR: We can’t say if it is a virus!
So we have to give the client the mail! You should check your
configuration/system
Aug 6 21:31:08 dc-ad p3scan[25246]: ERR: Scanner returned unexpected
error code. You should check your configuration/system.
Aug 6 21:31:08 dc-ad p3scan[25246]: ERR: Exiting now…
Aug 6 21:31:08 dc-ad p3scan: ERR: Scanner returned unexpected error
code. You should check your configuration/system.
Aug 6 21:31:08 dc-ad p3scan[25058]: ERR: Attention: child with pid
25246 died with abnormal termsignal (11)! This is probably a bug. Please
report to the author. numprocs is now 0
Aug 6 21:31:08 dc-ad kernel: p3scan[25246]: segfault at 241 ip
00007f0160a97ab4 sp 00007ffc114c50e0 error 4 in
libc-2.17.so[7f0160a4f000+1b7000]
Aug 6 21:32:29 dc-ad p3scan[25058]: P3Scan terminates now
Aug 6 21:34:44 dc-ad clamd: SelfCheck: Database status OK.
Aug 6 21:35:13 dc-ad clamd: SelfCheck: Database status OK.
Aug 6 21:35:13 dc-ad clamd[2199]: SelfCheck: Database status OK.

1 Like

LightSquid is a proxy traffic analyzer (HTTP & HTTPS), light.

http://docs.nethserver.org/en/v7b/web_proxy.html#report

Better, could be AWStats.

LightSquid is not a log analyzer.

More informations about LightSquid:
http://lightsquid.sourceforge.net/How%20It%20Work.html

1 Like

The problem seems to be in the antivirus component: clamd.
Is it running?

I begin the tests, again:

POP3 proxy: enabled
- Antivirus: disabled
- Antispam: enabled
Services: clamd@squidclamav - Enabled, Running
p3scan - Enabled, Running

I can receive emails (Mozilla Thunderbird, POP3, port 110):

Log viewer: /var/log/messages:

Aug 7 15:04:19 dc-ad freshclam[3139]: ClamAV update process started at Sun Aug 7 15:04:19 2016
Aug 7 15:04:19 dc-ad freshclam[3139]: main.cvd is up to date (version: 57, sigs: 4218790, f-level: 60, builder: amishhammer)
Aug 7 15:04:20 dc-ad freshclam[3139]: Downloading daily-22041.cdiff [100%]
Aug 7 15:04:21 dc-ad freshclam[3139]: Downloading daily-22042.cdiff [100%]
Aug 7 15:04:21 dc-ad freshclam[3139]: Downloading daily-22043.cdiff [100%]
Aug 7 15:04:21 dc-ad freshclam[3139]: Downloading daily-22044.cdiff [100%]
Aug 7 15:04:26 dc-ad freshclam[3139]: daily.cld updated (version: 22044, sigs: 488532, f-level: 63, builder: neo)
Aug 7 15:04:26 dc-ad freshclam[3139]: bytecode.cvd is up to date (version: 283, sigs: 53, f-level: 63, builder: neo)
Aug 7 15:04:32 dc-ad freshclam[3139]: Database updated (4707375 signatures) from database.clamav.net (IP: 195.30.97.3)
Aug 7 15:04:33 dc-ad systemd: Removed slice user-0.slice.
Aug 7 15:04:33 dc-ad systemd: Stopping user-0.slice.
Aug 7 15:04:33 dc-ad clamd: Reading databases from /var/lib/clamav
Aug 7 15:04:33 dc-ad clamd: Reading databases from /var/lib/squidclamav
Aug 7 15:04:33 dc-ad clamd[1351]: Reading databases from /var/lib/squidclamav
Aug 7 15:04:35 dc-ad kernel: perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Aug 7 15:04:47 dc-ad clamd: Database correctly reloaded (4868719 signatures)
Aug 7 15:04:47 dc-ad clamd[1351]: Database correctly reloaded (4868719 signatures)
Aug 7 15:04:47 dc-ad clamd: Database correctly reloaded (4868719 signatures)

Aug 7 15:35:25 dc-ad clamd: SelfCheck: Database status OK.
Aug 7 15:35:25 dc-ad clamd[1351]: SelfCheck: Database status OK.
Aug 7 15:37:45 dc-ad p3scan[3894]: POP3 Connection from 192.168.1.11:54387
Aug 7 15:37:45 dc-ad p3scan[3894]: Real-server address is 91.195.62.2:110
Aug 7 15:37:45 dc-ad p3scan[3894]: Ignoring servers TOP capability…
Aug 7 15:37:45 dc-ad p3scan[3894]: Ignoring servers PIPELINING capability…
Aug 7 15:37:50 dc-ad p3scan[3894]: Session done (Clean Exit). Mails: 1 Bytes: 1716

POP3 proxy: enabled
- Antivirus: enabled
- Antispam: enabled
Services: clamd@squidclamav - Enabled, Running
p3scan - Enabled, Running

I cannot receive emails (Mozilla Thunderbird, POP3, port 110):

Log viewer: /var/log/messages:

Aug 7 15:43:31 dc-ad /sbin/e-smith/db[4335]:
/var/lib/nethserver/db/configuration: OLD
p3scan=service|SSLScan|enabled|SpamScan|enabled|TCPPort|8110|Template|/etc/p3scan/p3scan-en.mail|VirusScan|disabled|access||status|enabled
Aug 7 15:43:31 dc-ad /sbin/e-smith/db[4335]:
/var/lib/nethserver/db/configuration: NEW
p3scan=service|SSLScan|enabled|SpamScan|enabled|TCPPort|8110|Template|/etc/p3scan/p3scan-en.mail|VirusScan|enabled|access||status|enabled
Aug 7 15:43:31 dc-ad dbus-daemon: dbus[643]: [system] Activating via
systemd: service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 15:43:31 dc-ad dbus[643]: [system] Activating via systemd:
service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 15:43:32 dc-ad systemd: Starting Time & Date Service…
Aug 7 15:43:32 dc-ad dbus-daemon: dbus[643]: [system] Successfully
activated service 'org.freedesktop.timedate1’
Aug 7 15:43:32 dc-ad dbus[643]: [system] Successfully activated service
’org.freedesktop.timedate1’
Aug 7 15:43:32 dc-ad systemd: Started Time & Date Service.
Aug 7 15:43:33 dc-ad esmith::event[4339]: Event:
nethserver-p3scan-update
Aug 7 15:43:33 dc-ad esmith::event[4339]: Migrating existing database
configuration
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
certificates
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
networks
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
accounts
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
routes
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
hosts
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
proxypass
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
fwrules
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
fwservices
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
portforward
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
tc
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
dhcp
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
contentfilter
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
vhosts
Aug 7 15:43:34 dc-ad esmith::event[4339]: Migrating existing database
domains
Aug 7 15:43:34 dc-ad esmith::event[4339]: Action:
/etc/e-smith/events/nethserver-p3scan-update/S00initialize-default-databases
SUCCESS [1.334358]
Aug 7 15:43:34 dc-ad esmith::event[4339]: expanding
/etc/p3scan/p3scan.conf
Aug 7 15:43:35 dc-ad esmith::event[4339]: Action:
/etc/e-smith/events/actions/generic_template_expand SUCCESS [0.385739]
Aug 7 15:43:35 dc-ad esmith::event[4342]: Event:
nethserver-firewall-base-save nethserver-p3scan-update
Aug 7 15:43:35 dc-ad esmith::event[4342]: Action:
/etc/e-smith/events/nethserver-firewall-base-save/S02providers-cleanup
SUCCESS [0.370819]
Aug 7 15:43:35 dc-ad esmith::event[4342]: expanding /etc/collectd.conf
Aug 7 15:43:35 dc-ad esmith::event[4342]: expanding /etc/hosts
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding /etc/lsm/lsm.conf
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/actions
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/hosts
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/interfaces
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/maclist
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/mangle
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding /etc/shorewall/masq
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding /etc/shorewall/nat
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/policy
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/providers
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/rtrules
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/rules
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/shorewall.conf
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/stoppedrules
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/tcinterfaces
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/tcpri
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/tunnels
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/shorewall/zones
Aug 7 15:43:36 dc-ad esmith::event[4342]: expanding
/etc/collectd.d/ping.conf
Aug 7 15:43:37 dc-ad esmith::event[4342]: expanding
/var/www/html/wpad.dat
Aug 7 15:43:37 dc-ad esmith::event[4342]: Action:
/etc/e-smith/events/actions/generic_template_expand SUCCESS [1.507194]
Aug 7 15:43:37 dc-ad systemd: Reloading.
Aug 7 15:43:39 dc-ad systemd: Configuration file
/usr/lib/systemd/system/auditd.service is marked world-inaccessible.
This has no effect as configuration data is accessible via APIs without
restrictions. Proceeding anyway.
Aug 7 15:43:41 dc-ad kernel: ipt_ULOG: ULOG: fail to register logger.
Aug 7 15:43:42 dc-ad kernel: ipt_ULOG: ULOG: fail to register logger.
Aug 7 15:43:43 dc-ad kernel: ipt_ULOG: ULOG: fail to register logger.
Aug 7 15:43:43 dc-ad logger: Shorewall reloaded
Aug 7 15:43:43 dc-ad esmith::event[4342]: [NOTICE] Shorewall restart
Aug 7 15:43:43 dc-ad esmith::event[4342]: Action:
/etc/e-smith/events/nethserver-firewall-base-save/S89nethserver-shorewall-restart
SUCCESS [6.659116]
Aug 7 15:43:44 dc-ad systemd: Reloading.
Aug 7 15:43:44 dc-ad systemd: Configuration file
/usr/lib/systemd/system/auditd.service is marked world-inaccessible.
This has no effect as configuration data is accessible via APIs without
restrictions. Proceeding anyway.
Aug 7 15:43:44 dc-ad esmith::event[4342]: [INFO] lsm is disabled:
skipped
Aug 7 15:43:44 dc-ad esmith::event[4342]: [INFO]
Aug 7 15:43:44 dc-ad systemd: Reloading.
Aug 7 15:43:44 dc-ad systemd: Configuration file
/usr/lib/systemd/system/auditd.service is marked world-inaccessible.
This has no effect as configuration data is accessible via APIs without
restrictions. Proceeding anyway.
Aug 7 15:43:44 dc-ad esmith::event[4342]: [INFO] service collectd
restart
Aug 7 15:43:44 dc-ad systemd: Stopping Collectd statistics daemon…
Aug 7 15:43:44 dc-ad collectd[1043]: Exiting normally.
Aug 7 15:43:44 dc-ad collectd[1043]: collectd: Stopping 5 read threads.
Aug 7 15:43:45 dc-ad collectd[1043]: rrdtool plugin: Shutting down the
queue thread. This may take a while.
Aug 7 15:43:45 dc-ad collectd[1043]: ping plugin: Shutting down thread.
Aug 7 15:43:45 dc-ad collectd[1043]: collectd: Stopping 5 write
threads.
Aug 7 15:43:45 dc-ad esmith::event[4342]: [INFO] collectd restart
Aug 7 15:43:45 dc-ad systemd: Started Collectd statistics daemon.
Aug 7 15:43:45 dc-ad systemd: Starting Collectd statistics daemon…
Aug 7 15:43:45 dc-ad esmith::event[4342]: Action:
/etc/e-smith/events/actions/adjust-services SUCCESS [1.689144]
Aug 7 15:43:45 dc-ad esmith::event[4342]: Event:
nethserver-firewall-base-save SUCCESS
Aug 7 15:43:45 dc-ad esmith::event[4339]: Action:
/etc/e-smith/events/nethserver-p3scan-update/S20firewall-adjust SUCCESS
[10.365141]
Aug 7 15:43:45 dc-ad systemd: Reloading.
Aug 7 15:43:45 dc-ad systemd: Configuration file
/usr/lib/systemd/system/auditd.service is marked world-inaccessible.
This has no effect as configuration data is accessible via APIs without
restrictions. Proceeding anyway.
Aug 7 15:43:45 dc-ad collectd[4830]: Initialization complete, entering
read-loop.
Aug 7 15:43:45 dc-ad esmith::event[4339]: [INFO] service p3scan restart
Aug 7 15:43:45 dc-ad systemd: Stopping p3scan proxy…
Aug 7 15:43:45 dc-ad p3scan[1100]: signalled, doing cleanup
Aug 7 15:43:45 dc-ad p3scan[1100]: P3Scan terminates now
Aug 7 15:43:45 dc-ad systemd: Starting p3scan proxy…
Aug 7 15:43:46 dc-ad p3scan[4869]: P3Scan Version 2.3.2
Aug 7 15:43:46 dc-ad p3scan[4869]: Selected scannertype: basic (Basic
file invocation scanner)
Aug 7 15:43:46 dc-ad p3scan[4869]: Listen now on 0.0.0.0:8110
Aug 7 15:43:46 dc-ad systemd: PID file /var/run/p3scan/p3scan.pid not
readable (yet?) after start.
Aug 7 15:43:46 dc-ad esmith::event[4339]: [INFO] p3scan restart
Aug 7 15:43:46 dc-ad systemd: Started p3scan proxy.
Aug 7 15:43:46 dc-ad esmith::event[4339]: Action:
/etc/e-smith/events/actions/adjust-services SUCCESS [0.651876]
Aug 7 15:43:46 dc-ad esmith::event[4339]: Event:
nethserver-p3scan-update SUCCESS
Aug 7 15:43:46 dc-ad p3scan[4870]: Changing uid (we are root)
Aug 7 15:43:46 dc-ad p3scan[4870]: Running as user: amavis
: amavis
Aug 7 15:44:48 dc-ad clamd: SelfCheck: Database status OK.

Aug 7 15:48:14 dc-ad p3scan[5268]: POP3 Connection from
192.168.1.11:54451
Aug 7 15:48:14 dc-ad p3scan[5268]: Real-server address is
91.195.62.2:110
Aug 7 15:48:14 dc-ad p3scan[5268]: Ignoring servers TOP capability…
Aug 7 15:48:14 dc-ad p3scan[5268]: Ignoring servers PIPELINING
capability…
Aug 7 15:48:14 dc-ad p3scan[5268]: Session done (Clean Exit). Mails: 0
Bytes: 0
Aug 7 15:49:17 dc-ad p3scan[5354]: POP3 Connection from
192.168.1.11:54456
Aug 7 15:49:17 dc-ad p3scan[5354]: Real-server address is
91.195.62.2:110
Aug 7 15:49:17 dc-ad p3scan[5354]: Ignoring servers TOP capability…
Aug 7 15:49:17 dc-ad p3scan[5354]: Ignoring servers PIPELINING
capability…
Aug 7 15:49:17 dc-ad p3scan[5354]: WARNING: Your scanner returned
neither 0, a viruscode, nor a good viruscode, but 2
Aug 7 15:49:17 dc-ad p3scan[5354]: ERR: We can’t say if it is a virus!
So we have to give the client the mail! You should check your
configuration/system
Aug 7 15:49:17 dc-ad p3scan[5354]: ERR: Scanner returned unexpected
error code. You should check your configuration/system.
Aug 7 15:49:17 dc-ad p3scan[5354]: ERR: Exiting now…
Aug 7 15:49:17 dc-ad p3scan: ERR: Scanner returned unexpected error
code. You should check your configuration/system.
Aug 7 15:49:18 dc-ad kernel: p3scan[5354]: segfault at 241 ip
00007fa33099eab4 sp 00007ffc03356080 error 4 in
libc-2.17.so[7fa330956000+1b7000]
Aug 7 15:49:18 dc-ad p3scan[4870]: ERR: Attention: child with pid 5354
died with abnormal termsignal (11)! This is probably a bug. Please
report to the author. numprocs is now 0
Aug 7 15:50:03 dc-ad dbus-daemon: dbus[643]: [system] Activating via
systemd: service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 15:50:03 dc-ad dbus[643]: [system] Activating via systemd:
service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 15:50:03 dc-ad systemd: Starting Time & Date Service…
Aug 7 15:50:03 dc-ad dbus-daemon: dbus[643]: [system] Successfully
activated service 'org.freedesktop.timedate1’
Aug 7 15:50:03 dc-ad dbus[643]: [system] Successfully activated service
’org.freedesktop.timedate1’
Aug 7 15:50:03 dc-ad systemd: Started Time & Date Service.
Aug 7 15:52:21 dc-ad dbus-daemon: dbus[643]: [system] Activating via
systemd: service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 15:52:21 dc-ad dbus[643]: [system] Activating via systemd:
service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 15:52:21 dc-ad systemd: Starting Time & Date Service…
Aug 7 15:52:21 dc-ad dbus-daemon: dbus[643]: [system] Successfully
activated service 'org.freedesktop.timedate1’
Aug 7 15:52:21 dc-ad dbus[643]: [system] Successfully activated service
’org.freedesktop.timedate1’
Aug 7 15:52:21 dc-ad systemd: Started Time & Date Service.
Service.
Aug 7 15:53:14 dc-ad p3scan[4870]: P3Scan terminates now
Aug 7 15:53:24 dc-ad systemd: Removed slice user-0.slice.
Aug 7 15:53:24 dc-ad systemd: Stopping user-0.slice.
Aug 7 15:54:48 dc-ad clamd: SelfCheck: Database modification detected. Forcing reload.
Aug 7 15:54:49 dc-ad clamd: Reading databases from /var/lib/clamav
Aug 7 15:55:05 dc-ad clamd: Database correctly reloaded (4868738 signatures)
Aug 7 15:55:53 dc-ad clamd: SelfCheck: Database modification detected. Forcing reload.
Aug 7 15:55:53 dc-ad clamd[1351]: SelfCheck: Database modification detected. Forcing reload.
Aug 7 15:55:54 dc-ad clamd: Reading databases from /var/lib/squidclamav
Aug 7 15:55:54 dc-ad clamd[1351]: Reading databases from /var/lib/squidclamav
Aug 7 15:56:07 dc-ad clamd: Database correctly reloaded (4868738 signatures)
Aug 7 15:56:07 dc-ad clamd[1351]: Database correctly reloaded (4868738 signatures)

In this moment, Aug 7 15:56:07:

Services: clamd@squidclamav - Enabled, Running
p3scan - Enabled, Stopped

Starting the p3scan service, manually:

Aug 7 16:00:48 dc-ad control-service: p3scan start
Aug 7 16:00:48 dc-ad systemd: Starting p3scan proxy…
Aug 7 16:00:48 dc-ad p3scan[6202]: P3Scan Version 2.3.2
Aug 7 16:00:48 dc-ad p3scan[6202]: Selected scannertype: basic (Basic
file invocation scanner)
Aug 7 16:00:48 dc-ad p3scan[6202]: Listen now on 0.0.0.0:8110
Aug 7 16:00:48 dc-ad systemd: PID file /var/run/p3scan/p3scan.pid not
readable (yet?) after start.
Aug 7 16:00:48 dc-ad systemd: Started p3scan proxy.
Aug 7 16:00:48 dc-ad dbus-daemon: dbus[643]: [system] Activating via
systemd: service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 16:00:48 dc-ad dbus[643]: [system] Activating via systemd:
service name='org.freedesktop.timedate1’
unit='dbus-org.freedesktop.timedate1.service’
Aug 7 16:00:48 dc-ad systemd: Starting Time & Date Service…
Aug 7 16:00:48 dc-ad p3scan[6203]: Changing uid (we are root)
Aug 7 16:00:48 dc-ad p3scan[6203]: Running as user: amavis

EDIT:

Thunderbird schedule send and receive:

Aug 7 16:03:14 dc-ad p3scan[6534]: POP3 Connection from
192.168.1.11:54567
Aug 7 16:03:14 dc-ad p3scan[6534]: Real-server address is
91.195.62.2:110
Aug 7 16:03:14 dc-ad p3scan[6534]: Ignoring servers TOP capability…
Aug 7 16:03:14 dc-ad p3scan[6534]: Ignoring servers PIPELINING
capability…
Aug 7 16:03:14 dc-ad p3scan[6534]: WARNING: Your scanner returned
neither 0, a viruscode, nor a good viruscode, but 2
Aug 7 16:03:14 dc-ad p3scan[6534]: ERR: We can’t say if it is a virus!
So we have to give the client the mail! You should check your
configuration/system
Aug 7 16:03:14 dc-ad p3scan[6534]: ERR: Scanner returned unexpected
error code. You should check your configuration/system.
Aug 7 16:03:14 dc-ad p3scan[6534]: ERR: Exiting now…
Aug 7 16:03:14 dc-ad p3scan: ERR: Scanner returned unexpected error
code. You should check your configuration/system.
Aug 7 16:03:14 dc-ad p3scan[6203]: ERR: Attention: child with pid 6534
died with abnormal termsignal (11)! This is probably a bug. Please
report to the author. numprocs is now 0
Aug 7 16:03:14 dc-ad kernel: p3scan[6534]: segfault at 241 ip
00007f871b872ab4 sp 00007fff7abb9ac0 error 4 in
libc-2.17.so[7f871b82a000+1b7000]
Aug 7 16:04:30 dc-ad p3scan[6203]: P3Scan terminates now
Aug 7 16:05:06 dc-ad clamd: SelfCheck: Database status OK.

In this moment, Aug 7 16:05:06:

Services: clamd@squidclamav - Enabled, Running
p3scan - Enabled, Stopped

EDIT 2:

After I have disabled Antivirus from POP3 proxy, everything it’s OK: I can receive emails, the p3scan service automatically Running.

1 Like

I’ve been playing with NS7 and just wanted to point out a couple of issues I’ve been finding (not sure if they are by design or not :slight_smile: )

I’ve installed NS7 on a KVM machine running latest CentOS 7.1 from the repository.

  • when I try to access the control pannel via http by typing in the browser neth.mydomain.com:980 instead of the full address, the redirect takes me to the ipadress of the server, instead of the dns address;

  • I’ve unable to install the Pop3 proxy package as well as the Samba Active directory - both give me yum cache errors; I’m aware of the other threads here regarding both issues;

  • when rebooting the service, there is no connectivity message as in NS 6.8, informing the user when the reboot and reconnect ion has been completed; I quite liked that small feature :slight_smile:

  • when creating a user through the control panel, and ticking the box to allow ssh access, does not seem to work at the moment as I haven’t been able to connect through ssh as expected.

  • when creating a Letsencrypt certificate with more than a domain (for example: “neth.mydomain.com mydomain.com” it gives an output where the certifciate issuer is stated as “Fake LE Intermediate X1” and the certificate does not work.

  • don’t seem to be able to delete previously issued certificates (such as the error one above); If we want/have to issue several certificates for different domains and subdomains (as we have to do it one by one) they will rapidly accumulate;

Thanks.

The login username has to contain the domain part, i.e. in my case I use:
ssh filippo.carletti@nethesis.it@nethserver

2 Likes

Yep, confirmed! Thanks for that, I wouldn’t have gotten there by myself!

edit: is there a way to disable the root login in the control pannel? it just makes me uncomfortable to have the root password expose like that.

edit2: another interesting bug i think i found in SOGo is when answering to an email above the quoted text when in the settings it is selected to answer bellow the quoted message - this makes SOGo crash, though I’m certain is nothing to do with NS.

1 Like

i still have the problem with shared folder and openldap (nethserver-directory)
while it seems ok with AD(nethserver-dc)
can anyone confirm it?

1 Like

Hello @StreetGuru maybe pop a long and take a look at under the Development section. SOGo repositories soon to be only for paid support customers

In my opinion, (Sorry but Im tending to go with @alefattorini) and I stopped using Sogo and went with webtop.

And I wont look back. Sorry SoGO, Its now a NoGO…

clinton

Yeah, I’ve seen that thread. I’m using NS 6.8 with the new SOGo 3 and I’m mostly using it exactly for that functionality. Personally, I would prefer as many alternatives as possible and let the users decide which to use. SOGo’s move is in part understandable, and as many point out, it remains an opensource project. I’m sure alternative repos for SOGo will quickly pop-up as it was so widely used on a community level.

2 Likes

I fired up a fresh install in a vm today, used unattended install, updated, rebooted, then installed samba-dc… config failed, unable to create a user. lost the gui error msgs.

(Mon Aug 15 10:27:41:657958 2016) [sssd] [confdb_init_db] (0x0020): Permission check on config file failed. (Mon Aug 15 10:27:41:658044 2016) [sssd] [load_configuration] (0x0010): ConfDB initialization has failed [Operation not permitted] (Mon Aug 15 10:27:41:658131 2016) [sssd] [main] (0x0020): Cannot read config file /etc/sssd/sssd.conf. Please check that the file is accessible only by the owner and owned by root.root.

[root@network sssd]# ls -al total 12 drwx--x--x. 2 sssd sssd 22 Aug 15 10:24 . drwxr-xr-x. 91 root root 8192 Aug 15 10:24 .. -rw-r--r-- 1 root root 0 Aug 15 10:24 sssd.conf

Anything you guys want me to check before I trash this vm and start from scratch again?

1 Like