i used physical Environment for installation. I do it 3-4 times but never get the keyboard right or that the manual configurate green interface comes up. only the dhcp what is my red interface comes up normal. So it was not possible to reach the webui. i got it now cause i logged in from outside my network at the red interface and configure it that way.
Could the keyboard problem be here?
(new line 86-86 for interactive)
there is also a problem with dhcp…
as you see in pic the eth I disabled by default on rc3
(note also the keyboard already selected in rc3 while to be selected in rc2)
while enabled on rc2 (with dhcp)
@transocean so it is possible that the password is created but not working due to different keyboard layout after reboot?
@hucky tnx i need some time to try with 2 eth, did you set red with dhcp and green with static ip?
2 Likes
yes, exactly. red with dhcp and green with manual (static)
I will try to recap, please correct me if I’m wrong.
We have two scenarios: interactive and unattended installations.
Unattended
- No problem founds
Interactive
- Keyboard layout was not set in RC 2, but US keymap is pre-selected in RC 3
- Keyboard selected from the web interface is not honored
- Network interfaces seems disabled in anaconda but at the end of installation the network works correctly
- Password set from the web interface is not honored
Please confirm the recap.
1 Like
yes, unattended seems ok, also if in the anaconda gui the network is not shown as "connected " as is in the rc2 gui, at the end the eth correctly take ip from dhcp server (tested with one eth)
confirmed 1,2,3
4. in my tests i didn’t have problem with password, i think it’s a consequence of 2
i need some more time to make other tests with 2eth red/green config
3 Likes
Hi,
May be…
I tried it yesterday with an unattended installation. It works without problems and the password can be changed without any problems.
Only the login in SOGo in connection with the Samba AD does not work.
But that is another issue.
But what I would like to say is that all the creators and developers involved in the development of Nethserver 7 do a great job. And we users do well to consider that all this is not yet finished.
Regards
Uwe
3 Likes
Thanks for your words friend 
we’re all doing a great job!
It should be fixed right now, check the package from nethforge-testing.
Hi Giacomo,
In Germany, we say: The candidate has 100 points.
It works,
Can we expect the final version of NS7 for Christmas?
Mmmm I think the final will be released in the new year, but also I don’t expect any major change between RC3 and final. (@davidep @filippo_carletti feel free to say your idea!).
We are planning these small improvements: https://github.com/NethServer/dev/projects/2
But we could also postpone this kind of enhancements after the final.
Does it worth it a new RC4? Only the time will tell: if there are no bugs, we can skip the RC4 
3 Likes
I really LOVE this tool 
now it’s pretty straightforward to understand where we’re moving to
wow… rally nice, tnx!
probably i’m little anxious 
but after the problems with anaconda in rc3 i would like to test installation from iso before the final release, if possible 
2 Likes
As you wish!
Also the network interfaces now appear as enabled inside Anaconda, but this is only a cosmetic fix.
2 Likes
I´ve also regcognized that- I´m using a german keyboard which is functioning in the VM console partly when I choose the english and not the german one.
1 Like
uuuuu i’m honored 
tested basic interactive install and (ofcourse) all goes well… i need some time to test installation with 2 eth…
great work and tnx again for having calmed my anxiety
3 Likes
The test iso http://www.nethserver.org/nethserver-7.3.1611.rc3b-x86_64.iso fixed the keyboard problem after interactive install.
2 Likes
Hi filippo_carletti,
May be it gives a problem with the link. Nothing to see there.
Regards
Uwe
I already removed the ISO since the bug has been verified (we have little space problems on www.nethserver.org machine 
)
2 Likes