NethServer Version: 7.7.1908 Module: Dedalo Hotspot Manager Hi, @mrmarkuz and me are trying to setup dedalo with an local installation of icaro on a centOS 8. The installation and provisioning of vagrant with icaro went fine, but if we want to call any webaddress to customize the manager we get …

I’ve rewritten the howto for icaro on CentOS 7 with a public domain name. If somebody is interested have a look here: [image] Install Dedalo Hotspot with Icaro on local servers Howto What we need: a nethserver for the dedalo installation CentOS Server for icaro install…

Here is my config: [root@fw ~]# config show dedalo dedalo=service AaaUrl= AllowOrigins= ApiUrl= Description=Gaestenetz DhcpEnd=254 DhcpStart=100 IcaroHost=icaro.drk.local Id=1 LogTraffic=disabled Name=DRKGast Network=192.168.182.0/24 Proxy=disabled …

For the NethServer part it seems all good, can you please paste the output of: systemctl status dedalo dedalo query list And again: dedalo query list when you trying to connect to Wi-Fi? Thanks.

[image] edoardo_spadoni: systemctl status dedalo systemctl status dedalo ● dedalo.service - Network access controller, runs on the firewal and intercepts all guest connections, based on CoovaChilli Loaded: loaded (/usr/lib/systemd/system/dedalo.service; enabled; vendor preset: disabled) …

I’ve a generally question to dedalo. What happens if a client asks for connection. The gateway (dedalo server) tries to route to icaro portal web site, but does it always do this through red interface? If so, how can we change, because the icaro server is at the green interface. We also tried to s…

My Problem seems to be with dedalo, not icaro. Yesterday I connected my dedalo to an icaro installation from Markus. Markus gets the portal page with a client at his dedalo installation, I don’t get it running with my dedalo.

Hi @m.traeumner , just to be sure… what is is network configuration on the dedalo side (NethServer)? You need to have at least these 3 roles: one red one green one hotspot

[image] davide_marini: what is is network configuration on the dedalo side Hi, It is a Nethserver with a green interface for LAN, a red interface for WAN and a third interface setup by dedalo.

Hi @m.traeumner , if I’m right you should have icaro (CentOS 8) and dedalo (NethServer) in the same network, in this case you should have the red of NethServer connected to CentOS. Is that you configuration?

[image] davide_marini: in this case you should have the red of NethServer connected to CentOS At the moment my icaro is at the green interface, but I tried at red interface too. I also test it with an icaro server from @mrmarkuz , reachable through the internet. Thanks for help Michael

NethServer Community

Icaro Dedalo Hotspot installation

Support

test

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled