What does Nethsever while installation with the second HDD?


(Nicky) #1

Hi,

after a new Installation of Nethserver, my second HDD ist out of Order!
There is no FS to read from the disk :frowning:

how can I retrieve the data?

Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0008504a

   Device Boot      Start         End      Blocks   Id  System

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2daf2daf

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          66      524288   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              66       19458   155764736   8e  Linux LVM

Disk /dev/mapper/VolGroup-lv_swap: 4127 MB, 4127195136 bytes
255 heads, 63 sectors/track, 501 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Nicky


(Giacomo Sanchietti) #2

Could you please past the output of following commands?

  • pvs
  • cat /proc/mdstat

(Nicky) #3

Hi,

[root@home /]# pvs
  PV         VG       Fmt  Attr PSize   PFree
  /dev/sda2  VolGroup lvm2 a--  148.53g    0


[root@home /]# cat /proc/mdstat
Personalities :
unused devices: < none >

Nicky


(Nicky) #4

All Data are back :grin:
Command was e2fsck

Nicky


(Stéphane de Labrusse) #5

Write some notes of what you did…we could start to undestand what it occured


(Alessio Fattorini) #6

@supernicky please give us a complete solution so we can mark this thread as solved