OpenVPN routing to LAN

Support
,
1

NethServer Version: 7.8.2003 (final)
Module: Openvpn Roadwarrior
Hello everyone! I think I read all topics with this problem, but can’t solve mine.
My setup is: internet > router (192.168.1.13/24) > Nethserver (192.168.1.2 - green interface) > roadwarrior (10.10.10.0/24)

LAN Route on my router Asus RT-N56UB1:

Снимок2
Снимок2751×340 31.7 KB

route -n on nethserver:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.13 0.0.0.0 UG 0 0 0 enp3s0
10.10.10.0 10.10.10.2 255.255.255.0 UG 0 0 0 tunrw
10.10.10.2 0.0.0.0 255.255.255.255 UH 0 0 0 tunrw
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 enp3s0

Client connects and i can access webinterface and also my DC server which is 192.168.1.1(also DNS) and nothing else. No pings by ip or domain name.

I have no idea what to do.

Any ideads?

Thanks!

2

Hi Egor,

and welcome to NethServer Community!

The routing settings look correct but there are bad firmwares out there, you may check for an update.

Did you enable “push all static routes” in the openvpn server settings?

grafik
grafik872×683 16.5 KB

Maybe you need to set a specific DNS for the clients?

grafik