OpenVPN net2net service

[McHenry (Henry)]

NethServer Version: 7.14.1708
Module: OpenVPN

OK, looks like IPSec did not work out of the box for our needs, happy to look into this further however looking for a solution. Now looking at OpenVPN as an alternative.

I have created an OpenVPN tunnel on port 1195 however when I check this port it is not accessible. Do I need a firewall rule to open the port or should this be done automatically?

In the list of services I can see OpenVPN@host-to-net is stopped on port 1194 however should there be a service for OpenVPN@net-to-net?

[m.traeumner (Michael Träumner)]

In the list of services I can see OpenVPN@host-to-net is stopped on port 1194

Please have a look at the logs. I don’t use VPN, but I think there should be an openvpn.log, if not you have to look at messages.log. Please post the errors.

At the following links are constructions how to setup openvpn.

OpenVPN with Nethserver howto?

Hi Charlie, I will try to help you, I think you just need few details to make it work set the roadwarrior server on the OpenVPN tab auth: if you choose only certificate you don’t need to provide user and pass to authenticate if you choose one of the other options you need to create system users in the general Users Section mode: usually the best is routed mode, just specify a local network (rcf 1918, e,g, 192.168.101.0/255.255.255.0) not already used by the firewall 2)Now yo…

http://docs.nethserver.org/en/v7/vpn.html