Filesystem label not empty?

NethServer Version: 7.4

What does Filesystem label not empty mean?

Sorry folks, it looks like a problem on proxmox. It was working, but I cannot access the USB RDX Device after a reboot…

Apr 30 19:13:09 pve14 kernel: [14653.290131] usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd
Apr 30 19:13:09 pve14 kernel: [14653.312034] usb 2-3: New USB device found, idVendor=1a5a, idProduct=0006
Apr 30 19:13:09 pve14 kernel: [14653.312036] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 30 19:13:09 pve14 kernel: [14653.312037] usb 2-3: Product: RDX
Apr 30 19:13:09 pve14 kernel: [14653.312038] usb 2-3: Manufacturer: TANDBERG
Apr 30 19:13:09 pve14 kernel: [14653.312038] usb 2-3: SerialNumber: xxxxxxxxxxxx
Apr 30 19:13:09 pve14 kernel: [14653.313305] usb-storage 2-3:1.0: USB Mass Storage device detected
Apr 30 19:13:09 pve14 kernel: [14653.313487] scsi host9: usb-storage 2-3:1.0
Apr 30 19:13:10 pve14 kernel: [14654.322509] usb 2-3: reset SuperSpeed USB device number 3 using xhci_hcd
Apr 30 19:13:10 pve14 kernel: [14654.566422] usb 2-3: reset SuperSpeed USB device number 3 using xhci_hcd
Apr 30 19:13:14 pve14 kernel: [14657.949992] xhci_hcd 0000:00:14.0: Cannot set link state.
Apr 30 19:13:14 pve14 kernel: [14657.950012] usb 2-3: USB disconnect, device number 3

For USB backups, USB drives are listed by its label. If the USB drive does not have a label it won’t show.

I gave the label Backup-1… I guess there is a problem with the HostOS, I have to solve this first…

I changed the USB-Ports, I use now the back and it seems they are working :

ServerHardware is a Fujitsu 1320 M3

Thank you…