Fax Configuration

NethServer Version: 6.8
Module: Fax Server

Hello everyone, I open this topic because of a fax server configuration problem. Use freepx 13, I created an internal iax2 and I added this extension as a modem in Nethserver, the modem is registered, I see it from cli of asterisk. the problem is that I can not send it, it to receive faxes, use two Messagenet as trunk lines, input and output, but every effort is in vain. sometimes I get “no local dial tone” (I confiurato already 'not to wait for the tone) and other times I get: Feb 26 21: 52: 18.82: [7554]: 000 000 245 SESSION BEGIN xxxxxxxxxxxxx
February 26 21: 52: 18.82: [7554]: HylaFAX ™ Version 5.2.5
February 26 21: 52: 18.82: [7554]: SEND FAX: 46 JOB DEST xxxxxxxx COMMID 000000245 DEVICE ‘/ dev / ttyIAX800’ FROM ‘admin t>’ USER admin
February 26 21: 52: 18.82: [7554] <- [12: AT + FCLASS = 1 \ r]
February 26 21: 52: 18.82: [7554] -> [2: OK]
February 26 21: 52: 18.82: [7554] <- [14: AT + VSID = “”, “” \ r]
February 26 21: 52: 18.82: [7554] -> [2: OK]
26 Feb 21: 52: 18.85: [7554]: DIAL xxxxxxxxxx
February 26 21: 52: 18.85: [7554] <- [16: ATDT0xxxxxxxx \ r]
February 26 21: 52: 32.62: [7554] -> [10: NO CARRIER]
February 26 21: 52: 32.62: [7554]: SEND FAILED: JOB 46 DEST 0xXXXXXXXX ERR No carrier detected {E002}
February 26 21: 52: 33.62: [7554] <- [5: ATH0 \ r]
February 26 21: 52: 33.63: [7554] -> [2: OK]
February 26 21: 52: 33.63: [7554]: END SESSION

could someone kindly explain in detail how to set up the fax server? thank you!

Since FreePBX 13 is not a supported module in NS 6.8, I think you’re referring to the Enterprise version.
Please contact Nethesis support :slight_smile:

By the way, my two cents:

It seems pretty straightforward to me: you have no phone line :wink:

You can find anything here: http://docs.nethserver.org/en/v7/fax_server.html

Do you have manually installed Freebpx 13 on NethServer? Or are you trying to connect NethServer IAX modems to a different freepbx server?

exactly, I configured a modem iax, to a PBX Asterisk present in lan, I created the 'internal iax2 (maybe that is the problem) and configured to route incoming inward iax2, in fact, calling the number Messagenet, feel the classic fax whistle, but I can not understand why they do not complete the receiving and transmitting it.

any support? please.

Can you add more details? Show us your configuration