Fail Roadwarrior Openvpn mask

Support
,
1

**NethServer Version: 6.8
**Module: OpenVPn

Hello, you first install nethserver. Configure a client and I roadwarrior presents the following problem.
The client connects well.
I successfully ping through the tunnel
Do not get to the hosts behind the tunnel, that is not masked.

the log say
Oct 19 20:29:12 nethfs kernel: Shorewall:ovpn2net:REJECT:IN=tun0 OUT=eth0 SRC=192.168.4.6 DST=10.100.85.113 LEN=64 TOS=0x00 PREC=0x00 TTL=63 ID=60027 DF PROTO=TCP SPT=57493 DPT=22 WINDOW=65535 RES=0x00 CWR ECE SYN URGP=0

any ideas?

thanks since now

2

I already resolved it. nethserver was happening that was with one internal ip receiving connections from a perimeter firewall.
to have a single interface and internal above was not going to work ever.
Use the following trick, create two interfaces in the netshserver, both internal ip, one set it as wan and another as the lan nethserver. Then apply permissions to that traffic from the network roadwarrior have permission to access the LAN and came running.

Thank you anyway!

1 Like