douglasn27
(Douglas Nogueira)
June 7, 2018, 2:17pm
1
NethServer 7.5 (RC)
Module: nethserver-dc
Hello! I am trying to bind a Nethserver to a domain controller through an OpenVPN tunnel.
My scenario is as follows:
Nethserver 1 (Cloud Vivo)
IP: 192.168.1.101
Mask: 255.255.255.255
Nethserver 2 (Local) - DC
IP: 10.0.5.1
Mask: 255.255.0.0
Nethserver 3 - Firewall
IP: 10.0.0.2
Mask: 255.255.0.0
Range VPN:
10.10.1.0/24
The VPN is closed between Server 1 and Server 3 (Firewall), in the same I have set the DC IP as DNS and Google as secondary.
On server 1 I have set the IP of the firewall as DNS and I can communicate normally through the VPN with the DC server, but when trying to join the domain happens failure.
Any tips?
robb
(Rob Bosch)
June 7, 2018, 3:41pm
2
Your AD DNS server is your NSDC container?
davidep
(Davide Principi)
June 7, 2018, 4:18pm
4
Never mix private and public DNS forwarding!
douglasn27
(Douglas Nogueira)
June 7, 2018, 4:37pm
5
Right @devidep !
I used it this way because I picked up another post here in the community that the guy used so and it worked, in my case it did not.
I removed the DNS from Google and left only the location and also left the services, after that the server entered the domain. Thank you: D
douglasn27
(Douglas Nogueira)
June 7, 2018, 7:42pm
7
No Last comment for this post
ok i found solution.
for correct name resolution in remote vpn tunnel fw i have insert as a secondary dns the ip of my primary fw
[image]
in samba server i have added ip subnet of vpn tunnel into the trusted network
[image]
now domain authentication work right with DOMAIN\username over vpn tunnel
hoping they will